Home / Product / Pick-Up Bed Rack / Truck Rack – medium, short, for roll bar and roll bar – More 4×4 mark II

Pick-Up Bed Rack / Truck Rack – medium, short, for roll bar and roll bar – More 4×4 mark II

BR014 Produkt zaprojektowany i wykonany w Polsce

Bed Rack More 4×4

Bed rack More 4×4 mark II is a solution for pickup truck owners who plan to mount a roof tent or rack over the vehicle’s trunk.

A version dedicated to vehicles with a cargo space roller shutter equipped with a short mounting rail and roll bar.

With its adjustable length and width design, it fits all European Double Cab pickups.

For installation, place 12 screws inside the mounting rails of the roller shutter and screw with the bed rack (screws are supplied).

For paki roller blinds that do not have mounting rails / gutters, use special brackets, available separately:

  • **Bedrack brackets for roller shutter without gutters (BR009)**.

In order to install brackets for a roller shutter not equipped with mounting rails, cut the seal between the side beam of the roller shutter and the side of the pick-up truck at the location of the bed racks. Each bracket is mounted with two M8 bolts to the inner edge of the pick-up truck’s side panel.

The bedrack is made of 3 mm thick steel, and the support beams are 12 cm wide.

Such a massive structure affects the strength of the bed rack and its load capacity, which is: static 350 kg / dynamic 150 kg.

Bed rack includes 2 mounts**working lamps** shining to the rear of the vehicle(lighting is optional equipment and must be ordered separately).

Bed rack adjustment range:

  • length: from 82 cm to 93 cm
  • width: from 146 cm to 154 cm
  • platform height: 50 cm

(medium version, level with roof, short / for roller and roll bar)

Bed Rack More 4×4 is also available in the following versions:

  • **high– to the sides (BR001)**.
  • **high– to sides + panels (BR002)**.
  • **high– for roller shutter (BR003)**.
  • **high– for blinds + panels (BR004)
  • **high, short – for roller shutter and roll bar (BR005)**.
  • ** low– to the sides (BR006)**.
  • ** low – for roller shutter (BR007)**.
  • **low, short – for roller shutter and roll bar (BR008)**.
  • ** medium– to side (BR010)**.
  • ** medium– for sides + panels (BR011)**.
  • **medium– for roller shutter (BR012)**.
  • ** medium– for roller shutter + panels (BR013)**.

The **Bedracks More 4×4** go through a process of shot-blasting,**spray galvanizing** using the electric arc method and then are powder-coated with Sahara abrasion-enhanced polyester and **CrackedDesert** structural paint.

Produkt zaprojektowany i wykonany w Polsce.